Tuesday, February 19, 2008


A cow is a completely automated milk-manufacturing machine. It is encased
in untanned leather and mounted on four vertical, movable supports, one at
each corner. The front end of the machine, or input, contains the cutting
and grinding mechanism, utilizing a unique feedback device. Here also are
the headlights, air inlet and exhaust, a bumper and a foghorn.

At the rear, the machine carries the milk-dispensing equipment as
well as a built-in flyswatter and insect repeller. The central portion
houses a hydro- chemical-conversion unit. Briefly, this consists of four
fermentation and storage tanks connected in series by an intricate network
of flexible plumbing. This assembly also contains the central heating plant
complete with automatic temperature controls, pumping station and main
ventilating system. The waste disposal apparatus is located to the rear of
this central section.

Cows are available fully-assembled in an assortment of sizes and
colors. Production output ranges from 2 to 20 tons of milk per year. In
brief, the main external visible features of the cow are: two lookers, two
hookers, four stander-uppers, four hanger-downers, and a swishy-wishy.

1 comment:

anksphenomenon said...

The process description of this machine is good for an initial product specification.
However for a detailed analysis of whether the cash flows over time given an extended period of operation considering the depreciation cost of the apparatus on a linear scale will have to be provided by the vendor to facilitate the acquisition process.

Although the initial claim of the vendor for amount of milk production is wide arrayed, the variability might be needed to be brought down to yield mass production scale.